Visual Land Impulse Instrukcje Operacyjne Pobierz pdf (Strona 20)

4. Reconnect the battery lead.

5. Insert the battery pack into the Control Housing

with the lead connector on top. Fold the leads

across the top of the pack.

6. Make sure the O-Ring and both sealing surfaces

are clear before reinstalling the battery cover. THIS

IS EXTREMELY IMPORTANT!

7. Finger tighten the thumb screws, and then

carefully tighten again 1/4 turn with a coin or

screwdriver.

HOME RECHARGER

Recharging Nicad batteries with the optional 110-volt

recharger is a simple procedure:

1. Remove and disconnect the Nicad battery pack

from the IMPULSE Control Housing.

2. Connect the recharger battery lead to the

battery pack.

3. Plug the recharger into a wall outlet, and the

batteries will begin recharging immediately.

4. The small, green light in the charger will stay on during

the entire charge cycle, indicating that all connections

have been made and the charger is working.

5. A full charge will take about 24 hours. Do not

charge more than 48 hours.

AUTO RECHARGER

The complete IMPULSE recharge kit (optional) includes one

battery pack, eight Nicad batteries, one 110-volt, 60-cycle home

recharger and one 12-volt, negative-ground, auto cigarette

lighter recharger. The 12-Volt Recharger offers a method to

recharge your nicad batteries while on the road.

1. Remove and disconnect the Nicad battery

pack from the Control Housing.

BATTERIES

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Brak uwag

Visual Land Impulse Instrukcje Operacyjne Strona 20